#105560 - 0-2in Suspension Kit - Component Builder [2008-2010]
One Up Offroad#105502 - 1.5in Suspension Kit - Component Builder
System Base Kit Includes*:
Not all parts shown in truck photos may be included.
*This kit only contains front truck components; you must add rear components separately if desired.*
Fitment: 2008 - 2010 F250/F350 | F450
1.5 inch lift for Ford super duty 2017 and newer Bare Bones CAM Level Kit, Comparable to most of the other "level kits" on the market. This system has an improved track rod location at the frame, it is better than the competitors track rod brackets. Not as good as our OUO Steady Axis geometry, but for people on a tight budget this will not be a downgrade to your truck. This will function much better long term then Teflon lined rod ends in a aftermarket track rod or track rod brackets completely in the wrong location.
This is not an OUO Steady Axis or an OUO Steady Track. This will have comparable bump steer to a stock truck. It is mandatory to run the 1.5in Bump stop drops with this track rod bracket no matter how much lift you set the levelers at. If you raise this level kit past an 1.5in lift it will start to pull your front axle to the driver side. We would always choose 2.5 degree cams as the least desirable option, they will work, we do sell them, lots of people run them, is it the best way to get castor gains? They offset your ball joints and push your axle off center of the housing stressing your seals, but they will add castor. Includes 2 1/2 degree alignment cams replaces your track rod bracket keeps your factory track rod includes adjustability of front ride height keeps factory length shocks.
- Main Category:
- All
- Main Category:
- Front Suspension Systems
- Lift Height:
- 1.5in Lift
- Lift Kit Years:
- 2011-2016
- Lift Kit Years:
- 2017-2019
- Lift Kit Years:
- 2020-2022
- Lift Kit Years:
- 2008-2010
- Lift Kit Years:
- 2023+