#105549 - 7-9in Lift Kit, Steady Axis, '05 Axle Conversion - Component Builder [99-04 F250 | F350 & 00-05 Excursion]

#105549 - 7-9in Lift Kit, Steady Axis™ +05 Axle Conversion - Component Builder

The minimum needed for this Kit:

• 105062 Track Rod Bracket, 05+ Conversion
• 105065 Track Rod 2016/F450
• 105047 Radius Arm Drop Brackets - Updated to #105120 for clocked Tcase Radius Arm Drop Brackets
• 101052 Clocking ring 
• 101051 Cross Member 
• 101438 Radius arms 

*Not all parts shown in truck photos may be included.

If you are lifting the front of your truck over 2.5 inches you will need rear lift components.

Fits: 1999-2004 F250/F350

        2000-2005 Excursion

Must convert to 2005-2007 steering box

Along with these OUO parts you will need other base conversion components to install a 2005 axle in 1999-2004 truck:

• New factory shock towers from Ford: Right 5C3Z5793CA, Left 5C3Z5A306CA, or in a Kit #101324.
• Complete donor axle 2005 or newer axle, including stock track rod, drag link, tie rod, shocks and springs
• OUO Radius arms are maditory for this kit. 
• If running a sway bar, you must use a 2005-2007 Ford F250 Super Duty 4wd, a Stock Ford 5C3Z-5482-DA or Hellwig Item #7676
• A BDS Sway Bar Drop bracket #123413 will be needed. 
• If using a 2005-2007 Ford F250 Super Duty 4wd axle, 2005 - 2007 sway bar links 6C3Z-5K483-AA will be needed
• 2008 - 2010 axles will use Ford YC3Z-5K483-AA  or 7C3Z-5K483-A 2008 - 2010 sway bar links
• 2011+ axles will use OUO #601075 sway bar links
• Front pitman will need to be reamed to fit drag link joint: All-star Performance #ALL11170
• 1999-2004 Front drive shaft will need to be shortened; 2005+ shafts are a possible fit without modifications
• A dual steering stabilizer kit must be used with this conversion. OUO #101532 and OUO #106001 are shown in the images of this install [#101532 included in this kit]