#105545 4.5in Lift Kit, Steady Axis, '05 Axle Conversion - Component Builder [99-04 F250 | F350 & 00-05 Excursion]

#105545 4.5in Lift Kit, Steady Axis™, '05 Axle Conversion - Component Builder

Minimum items needed kit.

• 105088 Track Rod Bracket, 2005+ Conversion, 2.5-4.5in Lift
• 105065 Track Rod 2016 F250-F350/F450

*Not all parts shown in truck photos may be included.

*This kit only contains front truck components; you must add rear components separately if desired. This excludes a shock package, a shock package, if added, will include front and rear shocks.*

If you are lifting the front of your truck over 2.5 inches you will need rear lift components.

Along with these OUO parts you will need other base conversion components to install a 2005 axle in 1999-2004 truck:

• New factory shock towers from Ford: Right 5C3Z5793CA, Left 5C3Z5A306CA, or in a Kit #101324.
• Complete donor axle 2005 or newer axle, including stock track rod, drag link, tie Rod, shocks and springs
• OE Radius arms need to be from a 2017 - 2022 Superduty, with the 4.75" frame end diameter. 6" frame end diameter 2016 and older arms will not fit. 
• If running a sway bar, you must use a 2005-2007 Ford F250 Super Duty 4wd, a Stock Ford 5C3Z-5482-DA or Hellwig Item #7676
• If using a 2005-2007 Ford F250 Super Duty 4wd axle, 2005 - 2007 sway bar links 6C3Z-5K483-AA will be needed
• 2008 - 2010 axles will use Ford YC3Z-5K483-AA  or 7C3Z-5K483-A 2008 - 2010 sway bar links
• 2011+ axles will use OUO #601075 sway bar links
• Front pitman will need to be reamed to fit drag link joint: All-star Performance #ALL11170
• 1999-2004 Front drive shaft will need to be shortened; 2005+ shafts are a possible fit without modifications
• A dual steering stabilizer kit must be used with this conversion. OUO #101532 and OUO #106001 are shown in the images of this install 
• Brake Lines